Inhoudsopgave
Advertenties
•
When you connect the wire ends to the charging station, there is an IN wire and an OUT wire
as indicated. The IN wire is threaded through the wire holder under the charging station and
must be connected to the IN plug, while the OUT wire must be connected to the OUT plug (see
following pictures).
1. IN
- from under the charging station (end of the cable)
2. OUT
- to the lawn (start of the cable).
After you have connected the two ends (IN and OUT), put on the protective cover
•
You can now attach the charging station to the floor.
Charging and checking the charging station
•
Place the robotic lawnmower in the charging station for charging, even if the robot has been
pre-charged at the factory.
•
Connect the cable to the adapter and then to the main power supply. The LED indicator on the
charging station lights up.
FLASHING
GREEN
CONSTANT: Fully charged and correctly connected to the boundary wire.
Manual_FX-RB224_Int24_rev1
RED: No connection to the boundary wire,
or boundary wire is interrupted somewhere.
GREEN: Charging and correct connection to the boundary wire.
38
Advertenties
Inhoudsopgave
