Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
1 GENERAL INFORMATION
Before using the product carefully read the infor-
mation contained in this instruction manual, the
GB
manual should be kept for future reference.
Italian is the original language of this instruction
manual, this language is the reference language
in case of discrepancies in the translations.
This manual is part of the essential safety require-
ment and must be retained until the product is
finally de-commissioned.
The customer, in case of loss, can request a copy
of the manual by contacting Calpeda S.p.A. or
their agent, specifying the type of product data
shown on the label of the machine (see 2.3
Marking)
Other documents that are provided or downloada-
ble, are:
- Instruction Manual (this manual)
- Product catalogue
Any changes, alterations or modifications made to
the product or part of it, not authorized by the
manufacturer, will revoke the "CE declaration"
and warranty.
1.1 Symbols
To improve the understanding of the manual, below
are indicated the symbols used with the related
meaning.
Information and warnings that must be
observed, otherwise there is a risk that the
machine could damage or compromise
personnel safety.
The failure to observe electrical information
and warnings, could damage the machine or
compromise personnel safety.
Notes and warnings for the correct
i
management of the machine and its
parts.
Operations that could be performed by the
final user.
Operations that must be performed only
by the installer.
Operations that must be performed by a
qualified electrician.
Operations that must be done performed by
a qualified technician.
Indicates that it is mandatory to use
individual protection devices.
Page 12 / 96
Operations that must be done with the
OFF
device switched off and disconnected
from the power supply.
Operations that must be done with the
ON
device switched on.
1.2 Manufacturer name and address
Manufacturer name: Calpeda S.p.A.
Address: Via Roggia di Mezzo, 39
36050 Montorso Vicentino - Vicenza / Italia
www.calpeda.it
1.3 Authorized operators
The product is intended for use by expert opera-
tors divided into end users and specialized techni-
cians. (see the symbols above).
It's forbidden, for the end user, carry out
i
operations which must be done only by
specialized technicians. The manufacturer
declines any liability for damage related
to the non-compliance of this warning.
INEXPERIENCED USERS
WARNING: This appliance is not intended for use
by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of
experience and knowledge, unless they have
been given supervision or instruction concerning
use of the appliance by a person responsible for
their safety.
Children should be supervised to ensure that they
do not play with the appliance.
END USER: if the user of the device, after care-
fully reading of the instructions. is responsible for
maintenance under normal conditions. They are
authorized to affect standard maintenance opera-
tions, like cleaning the device and the restart after
long stops.
INSTALLATION OPERATOR: Specialized techni-
cians who able to install the device, operate it
under normal conditions, carry out work during
"maintenance"; they are able to make electrical
and mechanical interventions for maintenance.
QUALIFIED ELECTRICIAN: specialized techni-
cian authorised to affect all electrical operations
including maintenance. They are able to operate
with in the presence of high voltages.
QUALIFIED TECHNICIAN: Specialized technician
able to install the device, under normal conditions,
working during "maintenance", and allowed to do
electrical and mechanical interventions for main-
MPS-MXS Rev. 14 - Operating Instructions
Advertenties
Hoofdstukken
Inhoudsopgave
