Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Translation of the original instructions
Regulations:
• The device complies with European Directive.
The certificate of compliance is available on our
website.
• EAC conformity mark (Eurasian Economic Commission)
• Equipment in compliance with British requirements. The
British Declaration of Conformity is available on our web-
site (see home page).
• Equipment in conformity with Moroccan standards.
• The declaration C
our website (see cover page).
Disposal:
This product should be disposed of at an appropriate
recycling facility. Do not dispose of in domestic waste.
PRODUCT DESCRIPTION
CT 48 Multicharge is a battery charger with traditional technology. This charger is designed to charge liquid lead-acid
batteries with voltages of 12V (6 elements), 24V (12), 36V (18), 48V (24) and within the ranges indicated below:
Voltage
12V
24V
36V
48V
POWER SUPPLY
The device must be placed so that the power socket is easily accessible. Supplied with a 16A plug, type CEE7/7.
Must be connected to an earthed socket supplying 230V with a 50Hz / 60 Hz frequency and able to supply 1200 W
with a 16A fuse.
Check that the power supply and protections are appropriate for the power required by the machine.
The recommended cross-section for an extension lead is: 3 x 2.5 mm².
INTERFACE (CF P.44)
1 – Ammeter
2 - Voltmeter
3 – Voltage selector switch
4 – Size selection switch
USE IN CHARGER MODE
Additional precautions
This machine is only designed to charge lead-acid batteries. Do not use the charger to charge
lithium batteries. This charger does not have the required protections and features to charge
this type of batteries.
Disconnect any electronic system from the battery during the charge (do not charge the battery whilst it
is connected to the vehicle).
MULTICHARGE CT 48
م
Mini
Maxi
90Ah
450Ah
90Ah
450Ah
90Ah
450Ah
70Ah
360Ah
(CMIM) of conformity is available on
5 – Fuse
6 – Charging leads + clamps
7 – Transport handles
8 – Power supply
EN
11
Advertenties
Inhoudsopgave
