Translation of the original instructions
Do not leave a charging battery unattended for a long time.
Acid projection hazard!
• Wear safety goggles and protective gloves
• If your eyes or skin come into contact with battery acid,
Connection / disconnection:
• Disconnect
• The terminal of the battery that is not connected to the car
• After the charging process, disconnect the battery charger
Connection:
• This device must be connected to an earthed power supply
• This machine is fuse-protected
• This equipment is intended for industrial environments
Maintenance:
• If the power supply cable is damaged, it must only
• Service should be performed by a qualified person
• Warning! Always remove the power plug from the wall
• Regularly take off the cover and remove dust with an air
• Under no circumstances should solvents or other aggressive
• Clean the device's surfaces with a soft, dry cloth.
10
MULTICHARGE CT 48
rinse the affected part of the body with plenty of water
and seek immediate medical assistance.
the
disconnecting the device to/from the battery
frame must be connected first. The other connection must
be made on the car frame, far from the battery and the
fuel line. The battery charger must be connected to the
power supply network.
from the power supply network and remove the connector
from the car frame and then the connector from the battery,
in this order.
(class A) and not for residential sites where the electric
current is supplied by the public low-voltage power supply
network. There may be potential difficulties in ensuring
electromagnetic compatibility on these sites, because
of the conducted interferences, as well as radiated
radioelectrical frequency.
be replaced by a cable specified or supplied by the
manufacturer or its after-sales service.
socket before carrying out any work on the device.
gun. Take the opportunity to have a qualified person check
the electrical connections with an insulated tool.
cleaning agents be used.
power
supply
before
connecting/
EN