Download Print deze pagina

Intended Use; Icons Used In Illustrations; Product Overview - Hach ScrubberMonitor Gebruikershandleiding

Advertenties

Beschikbare talen
  • NL

Beschikbare talen

  • DUTCH, pagina 168
This Class A digital apparatus meets all requirements of the Canadian Interference-Causing
Equipment Regulations.
Cet appareil numérique de classe A répond à toutes les exigences de la réglementation canadienne
sur les équipements provoquant des interférences.
FCC Part 15, Class "A" Limits
Supporting test records reside with the manufacturer. The device complies with Part 15 of the FCC
Rules. Operation is subject to the following conditions:
1. The equipment may not cause harmful interference.
2. The equipment must accept any interference received, including interference that may cause
undesired operation.
Changes or modifications to this equipment not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment. This equipment has been tested
and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC rules.
These limits are designed to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instruction
manual, may cause harmful interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference, in which case the user will be required to
correct the interference at their expense. The following techniques can be used to reduce
interference problems:
1. Disconnect the equipment from its power source to verify that it is or is not the source of the
interference.
2. If the equipment is connected to the same outlet as the device experiencing interference, connect
the equipment to a different outlet.
3. Move the equipment away from the device receiving the interference.
4. Reposition the receiving antenna for the device receiving the interference.
5. Try combinations of the above.

2.2 Intended use

The ScrubberMonitor is used on a vessel to continuously measure different parameters (pH, PAH,
turbidity, conductivity and sample flow) in exhaust gas cleaning system (EGCS) or scrubber wash
water. The ScrubberMonitor can be used in open loop, closed loop or hybrid systems to measure
both influent and discharge water in accordance with Marine Environmental Protection Committee
(MEPC) rules.

2.3 Icons used in illustrations

Manufacturer supplied parts

2.4 Product overview

Chemical or biological hazards. If this instrument is used to monitor a treatment process
and/or chemical feed system for which there are regulatory limits and monitoring
requirements related to public health, public safety, food or beverage manufacture or
processing, it is the responsibility of the user of this instrument to know and abide by any
applicable regulation and to have sufficient and appropriate mechanisms in place for
compliance with applicable regulations in the event of malfunction of the instrument.
6 English
User supplied parts
D A N G E R
Look
Do steps in reverse order

Advertenties

Hoofdstukken

loading