_CombiPower_IA_DE-IT.book Seite 63 Freitag, 21. Oktober 2011 8:10 20
CombiPower
NOTICE!
A
Check that the voltage specification on the type plate is the
same as that of the power supply.
Ensure that other objects cannot cause a short circuit at the
contacts of the device.
Ensure that the red and black terminals never come into
contact.
Never pull the plug out of the socket by the cable.
2.2
Safety when installing the device
DANGER! Danger of electrocution
D
For installation on boats:
If electrical devices are incorrectly installed on boats, corrosion
damage might occur. Have the inverter installed by a specialist
(marine) electrician.
Do not touch exposed cables with your bare hands. This espe-
cially applies to all cables in the AC mains circuit.
If you are working on electrical systems, ensure that there is
somebody close at hand who can help you in emergencies.
Never mount the device anywhere where there is a risk of gas
or dust explosion.
WARNING!
!
Only install the device in closed, well-ventilated rooms.
Never install the device in rooms where materials that are fire
hazards are stored, or where combustible gas is present; the
surface temperature can reach 60 °C.
Do not operate the device in systems with lead acid batteries.
These batteries give off explosive hydrogen gas that can be
ignited by sparks on electrical connections.
Before starting the device, ensure that the power supply line
and the plug are dry.
EN
General safety instructions
63