Advertenties
Beschikbare talen
Beschikbare talen
_CombiPower_IA_DE-IT.book Seite 94 Freitag, 21. Oktober 2011 8:10 20
Configuring the device with the remote control
"User Interface" menu (operating parameters)
Parameter
Explanation
LCD
Sets the display contrast
contrast
LCD
Determines the time after which
Auto-off
the display illumination is
switched off
Buzzer
Specifies if and when the remote
setting
control buzzer is activated:
Disable = deactivated
MSG = Tone when switching on
and every time a button is
pressed
Alert = Warning tone for fan fail-
ure, undervoltage, overload or
overtemperature
SHDN = Warning tone when
shutting down the device due to
overvoltage, undervoltage, over-
load or overtemperature
Alert setting Determines the fault messages
the relay should report (see
chapter "Connecting the fault
display relay" on page 85):
Disable = deactivated
Alert = Alarm for fan failure,
undervoltage or overload
SHDN = Alarm for overvoltage,
undervoltage, overload or over-
temperature
Shutdown
Determines how many times the
Retry
device is automatically started
after shutting down due to a
fault.
(Disable = never)
94
Value range
0% – 100%
0 s – 250 s
Disable
SHDN
Alert
Alert, SHDN
MSG
MSG, SHDN
MSG, Alert
Msg, Alert, SHDN
Disable
SHDN
Alert
Alert, SHDN
Disable, 1– 15
CombiPower
Default
50 %
120 sec.
Msg, Alert,
SHDN
Alert,
SHDN
5
EN
Advertenties
