Advertenties
Beschikbare talen
Beschikbare talen
_CombiPower_IA_DE-IT.book Seite 64 Freitag, 21. Oktober 2011 8:10 20
General safety instructions
CAUTION!
!
Ensure that the device is standing firmly.
The device must be set up and fastened in such a way that it
cannot tip over or fall down.
Make sure that the device is earthed.
Make sure that the lead has a sufficient cross-section.
Lay the cables so that they cannot be tripped over or damaged.
Fasten the cables securely.
Do not expose the device to a heat source (such as direct sun-
light or heating). Avoid additional heating of the device in this
way.
NOTICE!
A
If cables have to be fed through metal walls or other walls with
sharp edges, use ducts or bushings to prevent damage.
Do not lay cables which are loose or bent next to electrically
conductive material (metal).
Do not pull on the cables.
Do not lay the 230 V mains cable and the 12/24 V DC cable in
the same duct.
Set up the device in a dry location where it is protected against
splashing water.
Protect the device against corrosive fumes and salty or moist
air.
Protect the device and the cable against rain and moisture.
Ensure good ventilation.
Only install the device indoors, never outside.
Do not connect the 230 V output of the inverter to a different
230 V source.
64
CombiPower
EN
Advertenties
