Advertenties
6. Establish a Bluetooth connection between the mobile device and the Bluetooth receiver
in accordance with the specifications of the device manufacturer.
> The mobile device and the Bluetooth receiver are now connected via Bluetooth. The
LED system can now be controlled via the Schlüter
5.4 Teaching the radio remote controls
The radio remote control included in the delivery has already been taught in delivery state.
In order for the Bluetooth receiver to be controlled via additional radio remote controls, such
controls first need to be taught. Even if the radio remote control included in the delivery loses
its connection, it can be taught again in the manner described below.
1. Disconnect the voltage supply of the power supply. Unplug the mains cable to this end.
2. Ensure that the power supply and Bluetooth receiver are connected via plug connectors
in the manner described.
3. Plug the mains cable of the power supply into the intended socket.
4. Press and hold the ON/OFF and DOWN buttons on the radio remote control at the same
time for approx. 3 seconds.
> The status LED of the Bluetooth receiver flashes while the radio remote control is
being stored in the Bluetooth receiver.
5. Release the ON/OFF and DOWN buttons as soon as the status LED stops flashing on
the Bluetooth receiver.
> The radio remote control is now taught. The Bluetooth receiver can now be con-
trolled via the newly taught radio remote control.
74
WARNING!
It is imperative to follow the instructions in the Schlüter
CONTROL app.
NOTE
If step 4 described below is carried out more than once, all previously
taught radio remote controls lose their connection.
– Only carry out step 4 once per radio remote control.
-LED-COLOR-CONTROL app.
®
-LED-COLOR-
®
Advertenties
