Advertenties
LIPROTEC-P Operating Instructions
Operation via Schlüter
Activating Bluetooth pairing on the Bluetooth receiver
To make it possible for the Bluetooth receiver to establish a Bluetooth connection with a mo-
bile device (Bluetooth pairing), the pairing readiness needs to be activated via the radio re-
mote control. If the Bluetooth receiver is to be controlled using a mobile device, the Schlüter
LED-COLOR-CONTROL app needs to be installed » "Schlüter
page 60 .
1. Ensure that the power supply and Bluetooth receiver are connected via plug connectors
in the manner described.
2. Plug the mains cable of the power supply into the intended socket.
3. Press and hold the ON/OFF and UP buttons on the radio remote control at the same
time for approx. 3 seconds.
> The status LED of the Bluetooth receiver flashes blue. The Bluetooth receiver is now
ready to establish a Bluetooth connection for 90 seconds.
4. Release the ON/OFF and UP buttons as soon as the status LED stops flashing on the
Bluetooth receiver.
> The Bluetooth receiver can be found by the Bluetooth-enabled mobile device.
5. Install the Schlüter
-LED-COLOR-CONTROL app in accordance with the specifications
®
of the device manufacturer.
-LED-COLOR-CONTROL
®
-LED-COLOR-CONTROL" on
®
EN
-
®
73
Advertenties
