Advertenties
LIPROTEC-P Operating Instructions
Connecting components electrically
Personnel
Protective equipment
The components of the LED system are connected electrically by means of plug connectors.
Only one possible combination of system components is described below for example pur-
poses.
1. Ensure that the mains plug is not connected to the power supply.
2. Optional: Connect the Bluetooth receiver to the power supply.
3. Optional: Connect the Bluetooth receiver to a 2-way distributor.
4. Optional: Connect the extension cable to a Bluetooth receiver or a 2-way distributor.
> All plug connections between the power supply and the connected system compo-
nents are connected and have fully clicked into place. There is an electrical connec-
tion between the feed-through cable of the niche and the power supply. The LED
module is electrically connected in the niche.
Tiler
Protective gloves
EN
71
Advertenties
