Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Use
Adjusting the support feet
The equipment is equipped with 6 support feet� If the equipment is
not stable, the support feet can be adjusted�
- Turn the support feet as required to put the equipment in a stable
position�
- Tighten the locknuts to lock the support feet�
‼ NOTE
•
The machine is the most stable when all support feet are turned
fully in� Therefore start to level the machine by turning all
support feet fully in, before turning out the required support
feet to stable the machine�
⚠ WARNING
•
To prevent damages on your floor, make sure "U shape holder"
can't touch the floor when using the trainer� (fig� E-2)
Gain height for the "U shape slider" by adjusting the "Adjusting
cushion" if needed� ( See Assembly step D-1C-A)
Adjusting the pedal position
The both pedals can be adjusted according to the height and the
exercise position of the user�
- Loosen the 2 pedal fixing knobs�
- Move the pedal to the required position�
- Tighten the pedal fixing knobs�
‼ NOTE
•
Make sure the both pedals are fitted into similar positions
always�
Adjusting the console
The console can be adjusted according to the height and the exercise
position of the user�
- Loosen the console adjustment knob�
- Move the console to the required position�
- Tighten the console adjustment knob�
Power supply (Fig. E-1)
The trainer is powered by an external power supply� Refer to the
illustration to locate the trainer's power input�
‼ NOTE
•
Connect the power supply with the trainer before connecting it
to the wall outlet�
•
Always remove power cord when machine is not in use�
Console (fig F)
1� Display
2� Tablet/ book support
3� Buttons
⚠ CAUTION
•
Keep the console away from direct sunlight�
•
Dry the surface of the console when it is covered with drops of
sweat�
•
Do not lean on the console�
•
Only touch the display with the tip of your finger� Make sure that
your nails or sharp objects do not touch the display�
‼ NOTE
•
The console switches to standby mode when the equipment is
not used for 4 minutes�
•
Explanation Display functions
Time
- Without setting the target value, time will count up�
- When setting the target value, time will count down from your
target time to 0 and alarm will sound or flash�
- Without any signal being transmitted into the monitor for 4
seconds during workout, time will STOP
- Range 0:00~99:59
Speed
- Displays current training speed�
Maximum speed is 99�9 KM/H or ML/H�
- Without any signal being transmitted into the monitor for 4
seconds during workout, SPEED will display "0�0"
RPM
- Displays the Rotation Per Minute�
Display range 0~15~999
- Without any signal being transmitted into the monitor for 4
seconds during workout, RPM will display "0"
Watt
- Display current workout watts� Range 0 ~ 999
Level
- Shows tension level setting, when adjusting resistance, for 3
seconds�
2 1
English
Advertenties
Hoofdstukken
Inhoudsopgave
