AP mode
1. Press and hold the Mode button. The Wi-Fi symbol will start blinking slowly and the Wi-Fi
connection is in AP mode.
Reset Wi-Fi connection
1. Press and hold the Mode button. Existing connections will be deleted, the Wi-Fi symbol will
start blinking and a new connection will be made.
Switching on and off Wi-Fi connection
1. Make sure the heating indicator is not visible. The device should be ON but not heating.
2. Press and hold the ON/OFF button for three seconds to toggle between:
◦ Wi-Fi on - Wi-Fi indicator flashes;
◦ Wi-Fi off - no Wi-Fi indicator visible.
Wi-Fi thermostat ready (Optional)
This device can be connected with the optional Wi-Fi thermostat. The temperature is measured
at the Wi-Fi thermostat instead of the device. This ensures an optimized comfort level. The
device will keep heating until the set temperature of the Wi-Fi thermostat is reached.
It is possible to connect multiple devices to a single Wi-Fi thermostat. All the connected devices
will switch on and off simultaneously.
To use the Wi-Fi thermostat:
1. Place the Wi-Fi thermostat in any power socket.
2. Download the Eurom Smart App on a (mobile) device.
3. Open the Eurom Smart App.
4. Add the Wi-Fi thermostat and other devices to the Eurom Smart App.
5. Go to the device(s) and press the Pairing Button to pair the device(s) to the Wi-Fi
thermostat.
The device is connected to the Wi-Fi Thermostat. The G-sign illuminates in the Eurom Smart
app and on the device. Now you can enjoy the optimized comfort level of permanent electric
heating.
Temperature calibration (Optional)
CAUTION
When the device is mounted on the ceiling, the internal temperature sensor
is not able to measure the temperature in the room correctly as heat rises.
Therefore, it is absolutely necessary to calibrate the device panel when it is
mounted on the ceiling.
Calibrating the device
1. Set the desired temperature to 45 °C (max. temperature).
2. Let the device heat without interruptions for 120 minutes.
3. Place a digital room thermometer (not included) at a central place where the desired
temperature should be achieved; recommended is 150 cm from the floor.
52