Inhoudsopgave
Advertenties
Figure 39.
Ceiling mounting in a suspended ceiling grid
(This applies only to the Mon Soleil DSP 360 Frame and the Mon Soleil DSP 720 Frame.)
CAUTION
The Mon Soleil DSP Frame infrared panels can only be used in a suspended
ceiling frame of 60x60cm (Mon Soleil DSP 360 Frame) or 60x120 cm (Mon Soleil
DSP 720 Frame).
CAUTION
If the infrared panel does not fit perfectly in the suspended ceiling grid. Do not
proceed and never change anything on the suspended ceiling grid. Changes to
the ceiling grid will weaken the system, causing the infrared panel not to mount
securely enough.
CAUTION
When the infrared panels are installed, ensure that they are always accessible
and can be quickly disconnected from the mains.
1. Remove the ceiling plate
2. Make sure there is at least 25 cm space between the suspended ceiling and the ceiling.
3. Carefully place the device
(Figure
40, pos. 1).
4. Connect the device to the power supply.
44
(Figure
40, pos. 1) from where you wish to install the device.
(Figure
40, pos. 2) in the suspended ceiling grid
Advertenties
Inhoudsopgave
