Inhoudsopgave
Advertenties
Figure 31.
Horizontal wall mounting
1. Place the bracket against the wall, with the
bracket openings at the left and mark the
eight holes
(Figure
2. Drill eight 10 mm holes at the marked
spots.
3. Place the anchor bolts
4. Tighten the wall bracket
pos. 1) to the wall with the eight nuts
(Figure
32, pos. 2).
5. Place the device brackets
3) over the wall bracket
6. Slide the device
openings of the wall bracket
pos. 1).
7. Make sure the control panel is located at
the topside of the device.
8. To remove the device, lift and slide it in the
opposite direction.
40
32).
(Figure
32, pos. 3).
(Figure
32,
(Figure
33, pos.
(Figure
33, pos. 1).
(Figure
33, pos. 2) into the
(Figure
33,
Figure 32.
Advertenties
Inhoudsopgave
