Inhoudsopgave
Advertenties
1. Place the device on a non-flammable and
solid ceiling.
2. Place the device with a minimum distance
(Figure
37) of:
A. 30 cm from the side walls;
B. 185 cm from the floor.
3. Do not mount the device immediately over,
near or below a socket outlet.
4. Place the bracket against the ceiling and
mark the eight holes
5. Drill eight 10 mm holes at the marked
spots.
6. Place the anchor bolts
7. Tighten the bracket
the ceiling with the eight nuts
pos. 2).
8. Place the device brackets
3) over the ceiling bracket
1).
9. Slide the device
openings of the ceiling bracket
pos. 1).
10. Make sure the heater is properly secured
in the ceiling bracket.
11. To remove the device, lift and slide it in the
opposite direction.
(Figure
38).
(Figure
38, pos. 3).
(Figure
38, pos. 1) to
(Figure
(Figure
39, pos.
(Figure
39, pos.
(Figure
39, pos. 2) into the
(Figure
Figure 37.
38,
39,
Figure 38.
43
Advertenties
Inhoudsopgave
