Inhoudsopgave
Advertenties
1. Press the Open window button to activate. The Open window indicator appears on the
display.
2. When the ambient temperature decreases 8°C or more within 15 minutes, the device will
go in standby mode and the Open window indicator starts flashing on the display.
3. Press the Open window button to deactivate.
ECO mode
The remote control has an ECO button for an energy-efficient mode, meaning the device
maintains a room temperature of 16°C.
1. Press the ECO button to activate; EC appears on the screen.
2. Press the ECO button to deactivate.
If the heater is working in ECO mode and a timer setting becomes active, the device will start to
work according to the timer setting. When the timer setting ends and the device goes off, the
device will not return to the ECO mode.
Set the week timer
The week timer can be set via the remote control, but is easier to set using the Eurom Smart
App. If in the week timer setting mode no button is pressed for ten seconds, it will reset and
must start all over again. Make sure to not create any contradicting timer settings.
1. Press and hold the WEEK button until UU appears and flashes on the display.
2. Press the SET button; ON/OFF starts flashing on the display.
3. Press the Plus or Minus button to select:
◦ ON – Timer on;
◦ OFF – Timer off.
4. Press the OK button; UU appears on the display.
5. Press the SET button.
6. Press the Plus or Minus button to select:
◦ 01 – all timer settings are executed once only. This can only be planned for the current
week (U1 to U7). On Sunday (U7) at 23:59, all 01 timer settings are deleted;
◦ 99 – all timer settings are executed limitlessly.
7. Press the OK button; UU appears on the display.
8. Press the SET button; U1 appears on the display.
9. Press the Plus or Minus button to select the desired day, from U1 (Monday) to U7 (Sunday).
10. Press the OK button; the selected day appears on the display.
11. Press the EDIT button; 01 appears on the display.
12. Press the Plus or Minus button to select a number for this timer, from 1 to 4. Four means
the maximum timer settings per day. If a new timer is set with the same number, the old
timer will be overwritten.
13. Press the OK button; the selected number appears on the display.
14. Press the Temperature button; HP appears on the display.
15. Press the Plus or Minus button to select the desired temperature, from 0 °C to 37 °C.
16. Press the OK button; the selected temperature appears on the display.
17. Press the TIME ON button; HE appears on the display.
18. Press the Plus or Minus button to select the desired start time, from 00:00 to 23:00 in whole
hours.
49
Advertenties
Inhoudsopgave
