Inhoudsopgave
Advertenties
Operation
WARNING
Before every use, make sure that:
• you operate the device with dry hands;
• the device is clean and dry;
• the device is not damaged;
• the device is not covered or blocked;
• the device is securely mounted to the wall or ceiling.
CAUTION
When the device is turned on or off, it may emit a sound. This is the material
expanding and shrinking during heating and cooling down.
CAUTION
The day and time settings will be reset to default if the device is switched off,
using the ON/OFF switch, or is unplugged. The week timer set via the remote
control is automatically set to OFF.
If the device is used with the Eurom Smart App the time and day settings will automatically be
correct.
1. Press the ON/OFF button on the control panel
2. The display
(Figure
the ambient temperature.
Device control
Set the temperature
1. Press the Plus or Minus button to set the desired temperature, from 0 °C to 45 °C.
2. The device starts heating when the set temperature is higher than the ambient temperature
and stops heating when the ambient temperature reaches the set temperature. The heating
indicator will appear and disappear accordingly.
3. The display shows the ambient temperature.
Set the day and time
(This is not needed when using the Eurom Smart App. If the device is used with the Eurom
Smart App the time and day settings will automatically be correct.)
1. Make sure the heating indicator is not visible. The device should not be heating.
2. Press the Mode button, HH appears on the display.
3. Press the Plus or Minus button to select the current day, from 1 (Monday) to 7 (Sunday).
4. Press the Mode button, H1 appears on the display.
5. Press the Plus or Minus button to select the current hour, from 0 to 23.
6. Press the Mode button, H2 appears on the display.
25, pos. 1) will first show the set temperature for 3 seconds followed by
(Figure
25, pos. 11) or on the remote control.
47
Advertenties
Inhoudsopgave
