Assembly
WARNING
Plastic bags can be dangerous. To avoid danger of suffocation, keep this bag away
from babies and children.
The device is packed in one box. Remove all packaging material and check that the device is not
damaged. Do not use the device if it is damaged, but always contact your supplier. Keep the
packaging for safe storage and transport.
Mounting
WARNING
The wall or ceiling used for mounting must be made from non-flammable
material and should be able to withstand a minimum temperature of 125 °C.
CAUTION
Make sure to use suitable fastening materials, depending on the surface. The
provided anchor bolts are suitable for a brick wall. Never block the space
between the device and the wall or ceiling.
The device can be mounted in four ways:
• vertically to the wall;
• horizontally to the wall;
• freestanding with the pedestals mounted;
• to a ceiling.
In all four of the placements, the control panel should be visible and operable.
Wall mounting
1. Place the device on a vertical and solid
wall. Use a level when placing the device.
2. Place the device (horizontally or vertically)
with a minimum distance of:
A. 30 cm from the side walls;
B. 30 cm from the ceiling;
C. 20 cm from the floor;
D. 50 cm clearance on the front side.
3. Do not mount the device immediately over,
near or below a socket outlet.
Figure 27.
37