7. Press the Plus or Minus button to select the current minute, from 0 to 59.
8. Press the Mode button, the ambient temperature appears on the display, the day and time
are set.
Checking the day and time
1. Make sure the heating indicator is visible, the device should be heating.
2. Press the Mode button briefly and repeatedly to check:
◦ the day - HH;
◦ the hour - H1;
◦ the minutes - H2.
Remote control
The remote control should be directed towards the display in order to operate the device using
the remote control.
Set the temperature
1. Press the Plus or Minus button to set the desired temperature, from 0 °C to 45 °C.
2. The device starts heating when the set temperature is higher than the ambient temperature
and stops heating when the ambient temperature reaches the set temperature. The heating
indicator will appear and disappear accordingly.
3. The display shows the ambient temperature.
Set the day and time
1. Make sure the heating indicator is not visible. The device should be ON but not heating.
2. Press and hold the SET button until HH appears on the display.
3. Press the Plus or Minus button to select the current day, from 1 (Monday) to 7 (Sunday).
4. Press the SET button, H1 appears on the display.
5. Press the Plus or Minus button to select the current hour, from 0 to 23.
6. Press the SET button, H2 appears on the display.
7. Press the Plus or Minus button to select the current minute, from 0 to 59.
8. Press the SET button, the ambient temperature appears on the display, the day and time are
set.
Check the day and time
1. Make sure the heating indicator is visible, the device should be heating.
2. Press the SET button briefly and repeatedly to check:
◦ the day – HH;
◦ the hour – H1;
◦ the minutes – H2.
Open window mode
(The Open window mode is not available when using the Eurom Smart App.)
48