VOLTCRAFT B6 Ultimate Gebruiksaanwijzing pagina 93
Verberg thumbnails
Zie ook voor B6 Ultimate:
- Gebruiksaanwijzing (50 pagina's) ,
- Gebruiksaanwijzing (146 pagina's)
Advertenties
Beschikbare talen
Beschikbare talen
All manuals and user guides at all-guides.com
If the current value blinks, you can switch between manual ("Man") and automatic
("Aut") mode by simultaneously pressing the buttons "INC" and "DEC".
In manual mode ("Man"), the batteries are charged with the current you have set.
In automatic mode ("Aut"), the charger calculates the charge current automatically;
all you do is set the top limit for the charge current. Shorter charging times can be
achieved depending on the battery and its internal resistance.
• Change the charge current (or in automatic mode the top limit for the charge current)
using the buttons "INC" and "DEC", confirm the value using the "ENTER/START" button.
The number of cells is automatically identified!
• To begin the charging process, keep the "ENTER/START" button pressed for longer
(approx. 3 seconds).
• If the charger detects an error (e.g. no battery connected), a warning signal is emitted
and a corresponding info appears on the display.
You can stop the warning signal by pressing the "TYPE/STOP" button. You then return
to the previous configuration menu.
• If the battery is detected correctly, the following display appears, for example:
Battery type
Charge current Battery voltage
NiMH 2.0A
NiMH 2.0A
NiMH 2.0A
NiMH 2.0A
NiMH 2.0A
CHG 043:20 01253
CHG 043:20 01253
CHG 043:20 01253
CHG 043:20 01253
CHG 043:20 01253
Current charging duration
• Once the charging process has been completed, an audio signal is emitted.
If you wish to terminate the charging process beforehand, press the "TYPE/STOP"
button.
7.42V
7.42V
7.42V
7.42V
7.42V
Charge capacity in mAh
77
Advertenties
