Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
TIP!
The user menu enables the user to set the signals on the hob as desired. This concerns both audio
(tone and volume) and visual signals.
1. Touch the on/off key twice within three seconds.
The pause key is flashing.
2. Touch and hold the pause key.
3. Then, touch each cooking zone key clockwise (start with the cooking zone key on the front left).
4. Release pause key.
'U' is flashing alternately with a number between 2 and 7 on the cooking zone display on
the rear left.
The configuration value appears in the cooking zone display on the front left.
5. Touch the cooking zone key on the rear left and choose the correct number of the menu code
( see table).
6. Touch the cooking zone key on the front left and select the correct value (see table).
7. Confirm the setting; touch and hold the on/off key until you hear an audio signal.
User menu
27
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
