Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Switch on the automatic heat-up function
This function sets the cooking zone at the highest level in order to bring your pan rapidly up to the
required temperature. After a given time interval, the power level returns to the established level.
This function is available for power level 1 to 8.
Power level
1
2
3
4
5
6
7
8
1. Switch on the hob and select the desired cooking zone.
2. Touch and hold the slide control for at least 3 seconds at the desired level (from 1 to 8).
An 'A' appears in the display alternating with the selected power level. When the automatic
heat-up time has expired, the cooking zone will switch automatically to the selected level
which will show permanently on the display.
3. To stop the automatic heat-up function, select the cooking zone and touch the slide control.
Switch on the keep warm function
1. Switch on the hob and put a suitable pan on a cooking zone.
2. Touch the cooking zone key of the desired cooking zone.
The '0' of the selected cooking zone will light up clearly and a single beep sounds.
3. Touch the keep warm key.
The keep warm symbol 'u' appears in the display. The keep warm function is selected.
4. Set the power level to '0' or touch the keep warm key to switch off the keep warm function.
Connecting the Bridge Induction cooking zones
Two Bridge Induction cooking zones can be connected to each other. This creates one large zone
that can be used, for example, with a grill plate or a fish pan on the same power level. The pan must
be large enough to cover the centres of the front and rear cooking zone (at least 22 cm).
Heat-up time (seconds)
48
144
230
312
408
120
168
216
Operation of the hob
17
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
