Attaching the power cord holder
Fig . I
Unscrew and remove the power cord holder
fixing screw
from the handle
15 ]
[
Attach the power cord holder
handle
with the power cord holder fixing
[
8 ]
screw
.
15 ]
[
Turn the power cord holder fixing screw
clockwise until fully tightened .
Use
Connect the power plug
socket‑outlet .
m
CAUTION: Do not move the product's power
cord
after connecting the power plug with
[
18 ]
a socket‑outlet . Risk of the product slipping or
tilting .
Using the product outdoors
Fig . J
Connect the power plug
IPX4 socket‑outlet only .
If an IPX4 socket‑outlet should not be available,
the power plug
18 ]
[
only .
Press the switch
[
19 ]
(maximum brightness) to switch on the product .
Connecting an external device
to the product's socket
m
WARNING: Risk of fire! Do not
connect any appliance with a total output
of > 2500 W .
For HG10141/HG10141‑FR:
WARNING: Risk of electric shock! Only
m
use additional appliances if they are equipped
with a waterproof power plug with an IPX4
marking . If the wrong power plug is used,
water can enter the product and cause an
electric shock .
Open the socket cover
product .
Plug the external appliance into the socket
of the spotlight
(Fig . N, O) .
[
9 ]
10 GB/IE/NI
.
[
8 ]
to the
16 ]
[
[
15 ]
with a
18 ]
[
with an
[
18 ]
must be connected indoors
to position I or position II
at the rear of the
[
17 ]
For HG10141‑BS:
WARNING: Risk of electric shock!
m
Water may enter the product if the socket
cover
is not properly closed .
[
17 ]
Close the socket cover
Lock the socket cover
(Fig . N, O) .
m
CAUTION: Do not move the product's power
cord
after connecting the power plug with
18 ]
[
a socket‑outlet . Risk of the product slipping or
tilting .
Cleaning and care
Before cleaning:
–
Disconnect the power plug
socket‑outlet .
–
Wrap the power cord
hooks
[
13 ]
–
Let the product cool completely .
m
ATTENTION! Never immerse the product in
water or other liquids . Risk of product damage!
Clean the product with a lint‑free, slightly moist
cloth and mild cleaning agent .
Disposal
Product:
The packaging is made entirely of recyclable
materials, which you may dispose of at local
recycling facilities .
Observe the marking of the packaging
materials for waste separation, which
are marked with abbreviations (a) and
numbers (b) with following meaning:
1–7: plastics/20–22: paper and
fibreboard/80–98: composite materials .
Product:
Contact your local refuse disposal
authority for more details of how to
dispose of your worn‑out product .
[
20 ]
.
17 ]
[
with the interlock
17 ]
[
from the
18 ]
[
on the cable
18 ]
[
.
21 ]
[