Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Changing the basic settings
Your appliance has various basic settings, which are preset at
the factory. You can, however, change these basic settings as
required.
The appliance must be switched off and controls must not be
locked.
1.
Press and hold the
info button for 3 seconds to go to
the basic settings menu.
In the temperature display,
2.
Press the info button briefly and repeatedly until the setting
symbol for the current basic setting of a submenu is
displayed in the temperature display (e.g.
Using the temperature selector, set the required basic setting
3.
within a submenu (e.g.
Press and hold the info button for 3 seconds.
4.
Your basic setting is saved.
You can change the following basic settings:
Electronic clock
In this section, you can read about
how to set the timer
how to switch off your appliance automatically
how to switch your appliance on and off automatically
(preset operation)
how to set the time
find out how to activate rapid heat up
Clock function
Timer
Cooking time
End of operation
Preset operation
Clock
Rapid heat up
Notes
Between the times
:
dimmed if you do not make any settings in that period or no
clock function is activated.
When you set a clock function, the time interval increases
when you set higher values (e.g. cooking time up to :
the minute, using :
to the nearest 5 minutes).
appears.
).
).
Use
You can use the minute minder as an egg timer or a kitchen timer. The appliance does
not switch on or off automatically
The appliances switches off automatically after a cooking time setting has elapsed
(e.g. :
hours)
The appliance switches off automatically at a set time (e.g.
The appliance switches on and off automatically. Cooking time and end of operation
have been combined.
Setting the clock
Shortens the heat up time
and :
the clock display is
Basic settings menu
Submenu
Childproof lock
Audible signal
Automatic safety cut-out
The automatic safety cut-out is activated if your appliance is
switched on and you have not made any settings for a long
time.
The length of time after which your appliance switches itself off
depends on the settings that you make.
flashes in the temperature display. Appliance operation is
interrupted.
Turn the operating mode selector to the
it.
Clock display
&ORFN IXQFWLRQ EXWWRQ
For the
minute minder,
operation and preselection mode clock functions, a signal
sounds when the settings have elapsed and the
symbol flashes. To cancel the audible signal before it ends,
press the
clock function button.
Briefly press the
to
function. You then have 3 seconds to set the selected clock
function. After this time, the setting mode is exited
automatically.
Basic setting
Appliance controls
unlocked
Appliance controls locked
Appliance controls perma-
nent lock
Audible signal off
Audible signal 30 seconds
Audible signal 2 minutes
Audible signal 10 minutes
position to deactivate
5RWDU\ VHOHFWRU
:
)
cooking time,
clock function button to select a clock
Setting
symbol
end of
or
27
Advertenties
Hoofdstukken
Inhoudsopgave
