If after switching on Hydro clean
alternately in the temperature display, the cooking compartment
is not completely cooled. Wait until the cooking compartment
has cooled down and switch on Hydro clean again.
Once the cleaning aid is complete, the oven light switches on.
A signal sounds.
5.
Press the clock function button to exit the clock function.
$
Switching off and rinsing
Do not leave the remaining water in the cooking compartment
for a long time (e.g. overnight).
1.
Open the appliance door and remove the remaining water
with an absorbent sponge cloth (figure B).
2.
Clean the cooking compartment with a sponge cloth, a soft
brush or a plastic saucepan scrubber. Remove any
remaining, persistent residue with a glass scraper for glass
ceramic.
3.
Remove limescale with a cloth soaked in vinegar, then wipe
with clean water and rub dry with a soft cloth. Remember to
dry under the door seal.
Turn the operating mode selector back to the
4.
After cleaning, leave the appliance door ajar in the stop
5.
position (approx. 30°) for approx. 1 hour to allow the enamel
surfaces in the cooking compartment to dry thoroughly.
Rapid drying
1.
After cleaning, leave the appliance door ajar in the stop
position (approx. 30°).
Set the
Hot air to 50°C.
2.
After 5 minutes, switch off the appliance and close the
3.
appliance door.
Removing and fitting the appliance door
You can remove the appliance door to clean it more
thoroughly.
Risk of injury!
The hinges of the appliance door may snap shut with great
force. Always open the hinge locking lever fully when removing
the appliance door and close it fully after refitting. Do not reach
into the hinge.
Risk of injury!
If the appliance door has only been unhinged on one side, do
not reach into the hinge. The hinge can snap back with great
force. Call the after sales service.
or
and
appear
%
position.
Removing the appliance door
Open the appliance door fully.
1.
2.
Open the locking levers on the left and right-hand side fully.
The hinges are secured and cannot snap closed.
Close the appliance door until resistance becomes
3.
noticeable (figure A).
4.
With both hands, grip the door on the left and right-hand side,
close the door a little more and pull it out (figure B).
$
Fitting the appliance door
Insert the hinges in the left and right-hand holders (figure C).
1.
The notch on both hinges must engage.
Open the appliance door fully.
2.
Close the locking levers on the left and right-hand side fully
3.
(figure D).
&
The appliance door is secured and can no longer be
removed.
4.
Close the appliance door.
%
'
37