Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Wi-Fi installation
8 Wi-Fi installation
8.1 Introduction
The Solar Wi-Fi module is a data logging module. The 'plug & play' function enables the Wi-Fi module to simply
collect information from your PV system. The integrated Wi-Fi function gives the Wi-Fi module wireless access to
your router and enables it to send data to the web server. This allows remote monitoring. After your PV system has
been registered, you can consult these data by logging on to the online monitoring portal that is accessible via
www.solarmanpv.com/portal.
Downloading the SolarMAN app on your smart phone allows you to check the status of your PV system anytime,
anywhere.
This manual describes how to install the Wi-Fi module, register your PV system and download and install the
SolarMAN app.
8.2 Installing the Wi-Fi module
Before you begin installing the Wi-Fi module, it is important to check the following points in order to avoid problems
during installation.
The inverter is functioning and connected to the solar panels.
1.
You have wireless internet.
2.
The distance between inverter and wireless network is less than 50 metres to ensure a good connection.
3.
The distance between inverter and router is less than 100 metres to ensure a good Wi-Fi module signal.
4.
If all these things are in order, you can start installing the Wi-Fi module.
8.2.1
Establish an internet connection
Open your computer's network centre. The inverter is displayed as a wireless network connection under your serial
number. In this manual, the serial number AP_606452507 is used (hereinafter called SN). You can find the serial
number on the inverter.
All manuals and user guides at all-guides.com
Wi-Fi access point's
name
module's SN number
is
Wi-Fi
34
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
