Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Alarm codes and solutions
LCD display
Consistent Fault
Relay-Check Fail
DC INJ High
Permanent
EEPROM R/W Fail
Fault
SCI Failure
AC HCT Fault
GFCI Failure
Other possible problems:
If there is no information on the LCD display, please check whether the connection of the inverter with PV
generator or the grid is correct.
If the PV voltage is higher than 200V, but the inverter does not work, please call the service.
During periods of insufficient sunlight, the inverter may continuously start up and shut down. This is due to
insufficient power generated by PV modules. If the problem continues, please call the service.
The safety information in the instructions must be carefully read.
All manuals and user guides at all-guides.com
Possible actions
1. Disconnect all PV (+) and PV (-).
2. Wait for a few seconds.
3. After the LCD switches off, reconnect and check again.
4. If the problem remains, please call the service.
33
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
