Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Installation and startup
Connection procedure by MC4:
Connect the PV generator and the inverter using MC4 connectors shown below. Connect the positive and negative
terminals from the PV modules to positive (+) terminals and negative (-) terminals on the inverter.
Connection Procedure:
1.
Switch off the DC breaker and secure against being switched back on accidentally.
2.
Strip the cable 7 mm.
3.
Insert the striped cable into the barrel crimp tool and insure all the wires are captured.
4.
Put the barrel crimp tool with striped cable in the corresponding crimping notch and press to make a
steady connection.
Insert the cable assembly into the back of the male and female connector. A "click" should be heard or felt
5.
when the cable assembly is connected correctly.
All manuals and user guides at all-guides.com
21
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
