Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
6.4 Seat Memory Position
The control system on the Q700-UP has five predefined seat
memory positions. Each memory location has a set of factory
seat positioning presets:
Seating, Stand-Up, Lie-Down, Transfer and Relax. There is a
6th Memory position (Personalised Position) that can be used
as a customer-specific seat position. The Seat actuators are all
working with a feedback system to track their positions and
movements.
The control system on the Sedeo Pro Advanced has 3 predefined
seat memory positions.
Each memory location has a set of factory seat positioning
presets:- Seating, Lie-Down and Relax.
There is a 4th Memory position (Personalised Position) that can
be used as a customer-specific seat position. The Seat actuators
are all working with a feedback system to track their positions
and movements.
This is important:
a. To reach the required memory position.
b. To prevent mechanical clashes of the seat.
c. To operate the actuators especially towards the memory
positions in an ergonomic, smooth and safe way.
Although there is one free programmable seat Memory position,
all predefined Memory positions, if not suitable for the user,
can be changed and personalised to the needs required.
The software takes into account the range of the available
mechanical movements and also all
safety aspects.
6.5 Electric Seating function
Seat function:
The seat function as described in 6.4 is a predefined 'standard'
seat position.
It also creates the possibility to always return to this 'standard'
seat position when you are using other memory positions
(Standing, Relax or Lie down). This can be achieved by pulling the
joystick backwards.
6.6 Electric Lie Down function
The Quickie Sedeo Pro Advanced has an electric lie down
function. This function makes it possible for the user to lie down
in the wheelchair.
WARNING!
• Only use the lie down function on a sound and level surface.
• The lie down procedure automatically locks the front and rear
castor arms.
• If the locking procedure fails, the chair will automatically stop
in a safe position. The seat can always be returned to the
normally seated position in any mode.
28
6.7 Electric Relax function
The Quickie Sedeo Pro Advanced has an electric relax seating
function. This function makes it possible for the user to come
to a relaxed seating position in the wheelchair.
6.8 Anterior Tilt Function
The Quickie Sedeo Pro Advanced has an electric anterior tilt
function. This function makes it possible to support forward
transfers in combination with a footplate to ground setting.
This memory setting can also be used to support daily
activities like reaching out for devices or things that are in a
lifted reach position.
DANGER:
The use of knee fixation is mandatory when using the anterior
tilt function.
6.9 Electric Transfer function
The Quickie Q700-UP M/F has an electric transfer function.
This function makes it possible for the user to transfer in and
out of the wheelchair.
6.10 Electric Standing function
The Quickie Q700-UP M/F has an electric Standing function.
This function makes it possible for the user to stand up
in the wheelchair.
DANGER:
The use of knee fixation and chest straps are mandatory when
using the standing function.
WARNING!
• Before using the standing function ensure that the front
knee fixation is in place.
• Only use the standing function on a sound and level surface.
• The stand up procedure automatically locks the front and
rear castor arm suspension (MWD).
• A load shift to the front can prevent suspension locking.
• The stand up procedure automatically lowers the front anti
tip wheels (FWD).
• Do not change height setting of front anti tip wheels as that
would have a negative effect on static/dynamic stability in
standing function.
• If the locking procedure fails the chair will automatically
stop in a safe position. The seat can always be returned to
the normally seated position in any mode.
Sedeo Pro Advanced/Advanced UP | Rev.D | English
Advertenties
Hoofdstukken
Inhoudsopgave
