Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
4.8 Pre-set headrest
DANGER! / WARNING! (Fig. 4.26)
• DO NOT adjust the headrest by moving the Memory Block (A)
upwards. Only move the Memory Block downwards.
• DO NOT remove the Setting Strip (B), as this is in place to prevent
the Memory Block from moving upwards.
NOTE / CAUTION!
Damage to the powerchair recline mechanism on your wheelchair
can occur if the setting strip (B) is removed and memory block (A) is
moved upwards from the factory supplied setting.
DANGER! / WARNING!
• If a headrest is part of the options selected for the user/chair, never
drive the chair without the headrest attached.
• Never use the chair without a headrest if a person is transported
with the chair in a vehicle.
Headrest height (Fig 4.27)
1. Loosen (A) a few turns.
2. Adjust (B) to the desired position.
3. Tighten (A).
Memory setting (Fig 4.28)
1. Loosen (C) by one turn.
2. Slide (D) as far down as possible.
3. Tighten (C).
Headrest position (Fig 4.29)
1. Loosen (A) by one turn.
2. Adjust (B) to the desired position.
3. Tighten (A).
NOTE / CAUTION!
Correct the headrest height and tilt the headrest cushion as required.
Headrest cushion width position (Fig 4.30)
1. Loosen (A) by one turn.
2. Adjust (B) to the desired position.
3. Tighten (A).
18
B
A
2
1
3
D
C
2
B
2
A
B
2
A
Sedeo Pro Advanced/Advanced UP | Rev.D | English
Fig. 4.26
Fig. 4.27
B
A
Fig. 4.28
M5
1
M5
3
Fig. 4.29
2
M5
1
M5
3
Fig. 4.30
M5
1
M5
3
Advertenties
Hoofdstukken
Inhoudsopgave
