Advertenties
Beschikbare talen
Beschikbare talen
7. Assembly
Remove all parts from the packaging outdoors and check that all parts are included. If there are any parts missing,
please contact our customer service.
WARNING!
Due to its size, the trampoline must be assembled and installed by at least two adults.
WARNING!
Wear protective gloves when assembling the trampoline and make sure that you are working deliberately and care-
fully. Make sure that you do not get caught in any parts!
Note
Use the separate assembly instructions for assembly. The necessary information on the individual steps is presented
visually.
Note
Self-locking nuts are used for the assembly. These are suitable for one-time use only and must be replaced after
being removed.
7.1 Assembling the base frame
The base frame has to be assembled from multiple poles. Proceed as follows:
1. Find a suitable location for the trampoline. You can find more information in section '6 Selecting a location'.
2. Place the frame poles (1) on the ground with the holes facing upwards.
3. Place a connector (6) on the end of a frame pole (1) so that the hole in the leg sleeve is facing downwards.
4. Repeat step 3 five times and then connect all of the frame poles (1) with the connectors (6) to form a large
circle.
Note
The ends of the two frame poles must be inserted one into the other inside the connector. The ends of the frame
poles (1) must be completely inside the connector (6).
5. Connect one bracket pole (2) and two extension poles (5) to create one foot; repeat until you have made three
feet.
6. Insert the ends of the three feet into the leg sleeves of the connectors (6). The base frame is now fully assembled.
Note
They must CLICK audibly when being fastened. This indicates that the pin of the foot is correctly locked into the pin
hole of the leg sleeve.
GB/IE/NI
13
Advertenties
Hoofdstukken
