Advertenties
Beschikbare talen
Beschikbare talen
STEP 9
Note
The slot in the connector (10) must be facing upwards and the screw holes of the ring poles (9) and connectors (10)
must be aligned.
1. Screw the connector (10) to the ring pole (9) with a screw (15) and a nut (16).
2. Repeat this step five times.
STEP 10
WARNING!
Always guide a ring pole (9) through the openings of the safety net (11) with the connector (10) first. Otherwise the
sharp-edged ends of the ring pole (9) may damage the safety net (11).
Note
The entrance opening of the safety net (11) must not be located over a base foot.
Note
The slot in the connector (10) must be facing upwards and the screw holes of the ring poles (9) and connectors (10)
must be aligned.
Note
Each opening of the safety net (11) must contain a ring pole (9) with connector (10) and the end of the next ring
pole (9).
1. Spread out the safety net (11) on the jump mat (7).
2. Guide the ring poles (9) through the top openings in the safety net (11) with the connectors (10) first.
3. Connect the ring poles (9) by inserting the free end of the next ring pole (9) into the connector (10).
4. Firmly screw the end of the ring pole (9) into the connector (10) with a screw (15) and a nut (16).
STEP 11
Note
They must CLICK audibly when being fastened. This indicates that the pin of the net pole (3) is correctly locked into
the pin hole of the leg sleeve.
1. Insert the net poles (3) into the leg sleeves of the connectors (6).
STEP 12
Note
The bottom arch of the net pole with holder (4) must be facing outwards.
1. Place the ring poles (9) on the net poles with holder (4).
6. INSTALLING THE SAFETY NET
GB/IE/NI
23
Advertenties
Hoofdstukken
