Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Familiarising yourself with your appliance
5 Familiarising yourself with your appliance
5.1 Control elements
You can use the controls to configure all functions of
your appliance and to obtain information about the op-
erating status.
Before using for the first time
6 Before using for the first time
Configure the settings for initial start-up. Clean the ap-
pliance and accessories.
6.1 Setting an operating mode
Your appliance is set to air extraction mode by default.
Basic operation
7 Basic operation
7.1 Selecting a fan setting
Notes
¡ The appliance does not need to be switched on and
off separately.
¡ If more than one button has been pressed, the
highest selected fan setting always applies.
Press to set fan setting 1.
1.
Cleaning and servicing
8 Cleaning and servicing
To keep your appliance working efficiently for a long
time, it is important to clean and maintain it carefully.
8.1 Cleaning the appliance
Clean the appliance as specified. This will ensure that
the different parts and surfaces of the appliance are
not damaged by incorrect cleaning or unsuitable clean-
ing products.
WARNING ‒ Risk of explosion!
Highly caustic alkaline or highly acidic cleaning agents
in conjunction with aluminium parts in the interior of the
appliance may cause explosions.
Never use highly caustic alkaline or highly acidic
▶
cleaning agents. In particular, do not use commer-
cial or industrial cleaning agents in conjunction with
aluminium parts, e.g. grease filter on extractor
hoods.
Familiarising yourself with your appliance en
Switching on fan setting 1
Switching on fan setting 2
Switching on fan setting 3
Switching the lighting on or off
Note: When using it in circulating-air mode, you require
additional accessories.
When using it in circulating-air mode, set the operat-
▶
ing mode.
Press
to set fan setting 2.
2.
Press
to set fan setting 3.
3.
7.2 Switching on the lighting
The lighting can be switched on and off independently
of the ventilation system.
Press
.
▶
WARNING ‒ Risk of electric shock!
An ingress of moisture can cause an electric shock.
Before cleaning, pull out the mains plug or switch
▶
off the fuse in the fuse box.
Do not use steam- or high-pressure cleaners to
▶
clean the appliance.
WARNING ‒ Risk of burns!
The appliance becomes hot during operation.
Allow the appliance to cool down before cleaning.
▶
WARNING ‒ Risk of injury!
Components inside the appliance may have sharp
edges.
Carefully clean the appliance interior.
▶
Observe the information regarding the cleaning
1.
agents.
→ "Cleaning products", Page 20
Clean as follows, depending on the surface:
2.
Clean stainless steel surfaces in the direction of
‒
the finish using a sponge cloth and hot soapy
water.
19
Advertenties
Hoofdstukken
Inhoudsopgave
