Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Note: Carefully position the duct in order to protect
5.
the appliance against scratches.
Gently push the duct against the fan box using both
hands
and slide it back until the duct clicks into
place
.
Gently push against the appliance with one hand
6.
and carefully open the glass panel.
Note: Ensure that the front of the appliance does
7.
not protrude over the front of the cabinet after it is
screwed in.
Tighten the threaded pins through the recess in the
rail hand-tight until the appliance is flush with the
cabinet.
Insert the covers.
8.
Remove the grease filters.
9.
10.
Note:
Cabinets that hang freely on the wall or only adhere
to one side of another cabinet must be stabilised
using additional screws. If your cabinet is supported
by additional cabinets from both sides, you can skip
this step.
To stabilise the cabinet walls, screw in the screws
on the right and left using a screwdriver.
Insert the mains plug.
11.
Remove the protective film from the grease filters
12.
and insert the grease filters into the appliance.
Refit the cabinet door.
13.
Removing the appliance
Unplug the mains plug.
1.
Detach the cabinet door.
2.
Remove the grease filters.
3.
4.
If the cabinet walls have been stabilised with 2
wooden screws, unscrew both screws.
Installation instructions en
31
Advertenties
Hoofdstukken
Inhoudsopgave
