Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Note: Note the furniture manufacturer's specifica-
tions with regard to the load-bearing capacity of the
fitted unit.
Ensure that the fitted unit is heat-resistant up to
2.
90 °C.
Ensure that the fitted unit is still stable after the cut-
3.
outs have been made.
Preparing the units
Requirement: The unit is suitable for the installation.
Cover the hob to prevent damage.
1.
2.
Detach the cabinet door.
Make the cut-out for the exhaust pipe in the cabinet.
3.
Make the cut-out for the exhaust pipe in the interme-
4.
diate floor.
Make the recess for the mains connection.
‒
Ensure that the fitted unit is still stable after the cut-
5.
outs have been made.
Place the installation aid on the inside of the cabinet
6.
and mark the fixing points
.
Use a bradawl to mark the fixing points.
7.
For a wall thickness of 16 mm: Place the installation
8.
aids on the rails
and screw the rails into the side
walls of the cabinet
2
PZ
For a wall thickness of 18 mm and 19 mm: Screw in
9.
the rails without the installation aid.
Installation instructions en
.
29
Advertenties
Hoofdstukken
Inhoudsopgave
