Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
46
www.electrolux.com
11. CARE AND CLEANING
11.1 Cleaning the filters
1. Turn the filter (A) counterclockwise
and remove it.
2. Remove the filter (B).
3. Wash the filters with water.
4. Before you put the filter (B) back,
make sure that there are no residues
of food or soil in or around the edge of
the sump.
5. Put the filter (A) into position in filter
(B). Turn it clockwise until it locks.
12. TROUBLESHOOTING
If the appliance does not start or it stops
during operation. Before you contact an
Authorised Service Centre, check if you
can solve the problem by yourself with the
help of the information in the table.
WARNING!
Before maintenance,
deactivate the appliance and
disconnect the mains plug
from the main socket.
Dirty filters and clogged spay
arms decrease the washing
results. Make a check
regularly and, if necessary,
clean them.
A
CAUTION!
An incorrect position of the
filters can cause bad washing
results and damage to the
appliance.
11.2 Cleaning the spray arms
1. Turn the nut counterclockwise.
2. Remove the spray arm.
3. Clean the holes.
If the holes in the spray arm are clogged,
remove remaining parts of soil with a thin
pointed object.
11.3 External cleaning
• Clean the appliance with a moist soft
cloth.
B
• Only use neutral detergents.
• Do not use abrasive products, abrasive
cleaning pads or solvents.
11.4 Internal cleaning
• Carefully clean the appliance, including
the rubber gasket of the door, with a
soft moist cloth.
• If you regularly use short duration
programmes, these can leave deposits
of grease and limescale inside the
appliance. To prevent this, we
recommend to run long duration
programmes at least 2 times per
month.
With some problems, the display
shows an alarm code.
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
