Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
How to activate the acoustic
signal for the end of programme
The appliance must be in programme
selection mode.
1. To enter the user mode, press and
hold simultaneously
the indicators
flash and the display is blank.
2. Press
7. OPTIONS
7.1 EnergySaver
This option decreases the temperature of
the last rinsing phase and consequently
also the energy consumption
(approximately -25%).
Dishes can still be wet once the
programme is completed.
The duration of the programme will be
shorter.
8. BEFORE FIRST USE
1. Make sure that the current level of
the water softener agrees with the
hardness of the water supply. If
not, adjust the level of the water
softener.
2. Fill the salt container.
3. Fill the rinse aid dispenser.
4. Open the water tap.
,
and
.
Desired options must be
activated every time before
you start a programme.
It is not possible to activate or
deactivate options while a
programme is running.
Not all options are compatible
with each other. If you have
selected non compatible
options, the appliance will
automatically deactivate one
or more of them. Only the
indicators of the options still
active will stay on.
and
until
start to
3. Press
4. Press the on/off button to confirm the
How to activate EnergySaver
Press
on.
If the option is not applicable to the
programme, the related indicator does not
come on or it flashes quickly for a few
seconds and then goes off.
The display shows the updated
programme duration.
7.2 Extra Rinse
This option adds a cold rinse phase to the
washing programme. The option
increases the programme duration and
water consumption.
How to activate Extra Rinse
Press Extra Rinse, the related indicator
comes on
If the option is applicable to the
programme, the related indicator comes
on. In the display you can see the update
of the programme duration.
5. Start a programme to remove any
When you start a programme, the
appliance can take up to 5 minutes to
recharge the resin in the water softener. It
• The indicators
• The indicator
flash.
• The display shows the current
setting:
–
= Acoustic signal on.
–
= Acoustic signal off.
to change the setting.
setting.
, the related indicator comes
processing residuals that can still be
inside the appliance. Do not use
detergent and do not load the
baskets.
41
ENGLISH
and
go off.
continues to
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
