Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
OPERATION
Residual heat indicator
Boost
Capacity distribution of cooking zones
After a cooking zone has been used it may still remain hot for a while.
As long as the cooking zone is still hot an "H" will be visible in the
display.
You can use the 'boost' function to cook at the highest power level
during a short period of time (max.10 minutes). After the maximum
boost time the power will be reduced to setting 12.
Switching on boost
1. Put a pan on a cooking zone and switch the cooking zone on.
2. Tap twice with your finger at the end of the slide control to set the
'boost' setting.
Level 12 and 'boost' appear in the display.
Switching off 'boost'
'Boost' has been switched on, the display shows level 12 and 'boost'.
1. Tap any part of the slider with your finger.
In the display you will see a lower level.
Or:
2. Press the on/off button of the cooking zone you want to switch off.
You will hear a signal and the level in the display disappears. The
cooking zone has been switched off completely.
• Depending on the type of cooker, the cooking zones can affect
each other. When several of these cooking zones are switched
on at the same time, the capacity is shared automatically between
them.
• When the maximum capacity of the combination of cooking levels
is reached during setting, one or more zones are automatically
reduced to the highest possible setting at that moment. This is
indicated by the flashing of the relevant control element. The last
set cooking zone takes priority.
EN 17
Advertenties
Hoofdstukken
Inhoudsopgave
