List of preprogrammed satellites from which you can choose:
Satellite
Position
Astra 1
19,2 E
Astra 3
23,5 E
Astra 2
28,2 E
Hotbird
13
Hellassat 2
39
Turksat
42
Eutelsat 9
9
It is recommended to wait for the GPS location
∞
You will see a blinking
location. As long as it is blinking, the system is searching for the GPS location. When the symbol is continuously
displayed, the system has determined its GPS location.
We recommend that you wait with the selection of the desired satellite until the system has determined the GPS
location. The time needed for the determination of the GPS location is approximately 1 minute (see also next
remark).
After determination of the correct GPS location, the system will be able to find the satellite more quickly. It also
provides for the opportunity to set the correct Dish/LNB settings to ensure position optimal reception.
The correct position of the LNB is shown on the display for each satellite, which may differ per selected satellite.
When the GPS location has not been found (yet), by default this position will be 0.
Remark:
In the case of a weak GPS signal, it might not be possible to determine the location, in which case the system can
be used as normal. However, finding the satellite will take longer and the optimal position of the Dish/LNB will not
be provided. If the GPS signal improves during satellite search, then the system will adjust automatically.
Satellite
Eutelsat 7
SES 5
Thor
E
Eutelsat 5
E
Eutelsat 12A
E
Intelsat 907
E
Telstar 12
Hispasat
symbol on the right-hand side of the display that indicates the status of the GPS
You can browse through the preprogrammed satellites step by step.
By means of the arrow buttons located on the control module (buttons
4 and 5), For each satellite, the correct Dish/LNB position is shown on
the display.
Position
7
E
5
E
1
W
5
W
12,5 W
27,5 W
15
W
30
W
page 9