Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Switch on your satellite receiver to provide the
The system is now ready for use.
3.5
Searching satellite
After connecting the wiring as described in section 3.4, switch on your satellite receiver and television. Then
the wiring as described in section 3.4, switch on your satellite receiver and television. Then
the wiring as described in section 3.4, switch on your satellite receiver and television. Then
connect the control module to the antenna system by pressing it
On the display of the control module the following will be then shown:
On the display of the control module the following will be
This last message will disappear within a few seconds, after which the system will present
this level, you can select the satellite of your choosing.
this level, you can select the satellite of your choosing.
During its first usage, the system will preselect
previously selected satellite(s) and will show it
ellite(s) and will show it on the display after startup.
Press the F-connector on the other end of the
over the connector of the power inserter (indicated with "Antenna
R6"), so that the rubber is indented, and hand-tighten it.
R6"), so that the rubber is indented, and hand
Connect the short coaxial cable between the connector of
inserter (indicated with "Receiver") and the "Antenna In" connector
of
your receiver, and hand -tighten both items.
Insert the power adapted jack plug (round plug) in the 24V port of
Insert the power adapted jack plug (round plug) in the 24V port of
the power inserter (indicated with "Power-in 24V") and insert the
power plug of the power adapter in a 230V wall outlet.
receiver to provide the LNB with power.
to the antenna system by pressing it firmly into its socket.
TRAVEL VISION
RRECREATION
FIRMWARE V****
within a few seconds, after which the system will present
within a few seconds, after which the system will present the satellite menu. At
ASTRA1 19.2°
TURN LNB 0,0
system will preselect the Astra1 satellite. The system will store and remember
connector on the other end of the 15 mtr coaxial cable
cable between the connector of the power
"Receiver") and the "Antenna In" connector
BOOTING
∞
The system will store and remember
(indicated with "Antenna
in 24V") and insert the
230V wall outlet.
Page
8
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
