Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Before storing the system, first disconnect the power supply before disconnecting the coaxial cable and
disassembling the antenna with the tripod etc. (Optionally, a special bag is available in which you can store the
system).
6.1
Stop button
You can push the red Stop button(8) at any time and as a result, the system will stop all actions and will
start over by displaying the satellite choice menu
7.0
Error messages
7.1
No satellite found, check manual
When the satellite has not been found, you will receive the following message:
•
Check whether there are any obstructions. (See section 2.1)
•
Check if the latest Travel Vision R6 ® software version has been installed for any possibly changed
satellite frequencies. See
•
You are possibly outside the broadcast area of the desired satellite.
7.2
Satellite found, but no picture
•
Check the coaxial cable between the power inserter and your satellite receiver.
•
Check the connection cables between your satellite receiver and your television.
•
Switch the receiver and the television off and back on.
•
Check the user manuals of your satellite receiver and television.
7.3
Satellite found, but not all channels
Check whether your subscription or smart cart is still valid.
7.4
Error No 24V connected:
The AC power adapter is probably not connected.
The PI inserter may be coonected the wrong way, Check all connectors and switch power off and back
on. Reinstall the control module. See also 8.1 troubleshooting
SYSTEM STOPPED
SATELLITE
NOT FOUND
PLEASE CONSULT
MANUAL
www.travel-vision.com
or consult your dealer.
No 24V CONNECTED
page 15
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
