Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
3.8
Connection of second receiver
After aligning the dish you can optionally connect a second receiver to the satellite antenna.
4.1
Menu
The menu provides for optional settings, including:
The menu provides for optional settings, including:
1) Language
2) Firmware update
1)
Language
You can select English, German, French
Select the respective language with the arrow buttons (4 and 5) and press Enter (3) for confirmation.
2)
Firmware update
The Travel Vision R6 ® searches for satellites based on various preprogrammed fre
The Travel Vision R6 ® searches for satellites based on various preprogrammed frequencies. These
The Travel Vision R6 ® searches for satellites based on various preprogrammed fre
frequencies have been carefully selected by
these frequencies change, Travel Vision BV will release new software so that the system can use the
these frequencies change, Travel Vision BV will release new software so that the system can use the
these frequencies change, Travel Vision BV will release new software so that the system can use the
new frequencies. This software is freely available for download at the website
new frequencies. This software is freely available for download at the website
and at your local dealer. (be sure to download the Australian firmware update)
Download the software for your Travel Vision system from the website and store it on a USB flash drive.
Download the software for your Travel Vision system fro
Insert the USB flash drive in the USB port
The software transfer is only possible when the system is fully connected.
oftware transfer is only possible when the system is fully connected.
Select the firmware menu with the Enter button (3)
Select the firmware menu with the Enter button (3)
receiver
can optionally connect a second receiver to the satellite antenna.
can optionally connect a second receiver to the satellite antenna.
, German, French or Dutch as the user language.
SETTINGS:
LANGUAGE
Press the enter button
language with the arrow buttons (4 and 5) and press Enter (3) for confirmation.
language with the arrow buttons (4 and 5) and press Enter (3) for confirmation.
ENGLISH
carefully selected by Travel Vision BV, but they are subject to
(be sure to download the Australian firmware update)
in the USB port located on the bottom of the control module (see section 2.1).
Connect the coaxial cable of the 2nd receiver
Connect the coaxial cable of the 2nd receiver
Travel Vision BV, but they are subject to change. When
m the website and store it on a USB flash drive.
www.travel
www.travel-vision.com
trol module (see section 2.1).
page 13
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
