Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Using an external socket:
The use of an external socket may have consequences for the operation of the system. In many cases
this is due to voltage loss and the system will therefore display the error message "voltage too low".
There are a number of reasons why the system may not operate when an external socket is used:
•
A thinner/lighter type of coaxial cable is often used in camper vans and caravans.
•
The junction box or the cable may have a fault to earth, perhaps caused by damage.
Where the coaxial cable is too thin or there is a leakage of current somewhere in the circuit, too little
voltage will reach the R6 system. The cable and the junction boxes should be
The system has found the satellite but is aligned to the caravan/camper van.
The system may align to a reflective surface like the side of the camper van/caravan, due to reflection of
the satellite signal. The satellite signal is sufficient to receive the satellite but is too weak to allow viewing
of some (or all) TV channels.
Move the antenna and then realign it, or stand between the dish and the reflective surface while the
search process is in progress.
checked.
Page 18
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
