OPERATION
Child lock
Pause
EN 16
From the eco stand-by mode you can't immediately start cooking.
To be able to, the hob first needs to be switched to the stand-by mode.
Did you know that
After 20 minutes in the stand-by mode the hob will automatically
switch to the eco stand-by mode to prevent unnecessary
energy consumption.
Your induction hob is equipped with a childproof lock that lets you
lock the appliance. It prevents unintended switching on of the cooking
zones.
Switching on the childproof lock
• Press the key button for 2 seconds.
A double beep will be heard. All buttons are in-active now, except
for the key button. The hob first switches to the eco stand-by mode
and then to the childproof lock mode. The red light is constantly on.
• Press the child lock button again for 2 seconds to get the hob from
the childproof lock.
A single beep will be heard. The hob is now in the stand-by mode.
The red light next to the key button is off.
Tip
Set the hob to the childproof lock mode before cleaning the hob to
prevent it from accidentally switching on.
Did you know that
When the hob is set to the childproof lock, is uses just as little energy
as when it is in the eco stand-by mode.
With the pause function, you can set the entire hob to 'pause' for
5 minutes during cooking. The energy supply to the cooking zone
stops without settings being lost. However you must remember
that the cooking zone will remain hot for a while. You are therefore
recommended to remove delicate dishes from the cooking zone.