Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Installation/Connection
Installing the unit (in-dash mounting)
Orientate the trim
plate as illustrated
Installing the unit (without mounting sleeve)
(for KD-X38MDBT)
1 Remove the mounting sleeve and trim plate from the unit.
2 Align the holes in the unit (on both sides) with the
vehicle mounting bracket and secure the unit with screws
(commercially available).
Use only the specified screws. Using wrong screws might damage
the unit.
(for KD-X38MDBT)
Hook on the top side
before fitting.
Bend the appropriate tabs to hold the
sleeve firmly in place.
Removing the unit
(for KD-X38MDBT)
Do the required wiring.
(Page 43)
Dashboard of
your car
ENGLISH
41
Advertenties
Hoofdstukken
Inhoudsopgave
