Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
8.0 Maintenance
Before any maitenance is started, turn the battery off and remove it.
NOTE: All Service and Maintenance proceedures carried out on the Add-on Bike require the Battery Locking Key. Without this key no
maintenance is possible.
Checks to be carried out before use:
When
What
• Every 4 weeks,
• Grease the cables where they leave the
(depending on use).
• Check all screw connections are secure.
• Oil the drive chain.
• Every 2 - 3 months,
• Clean regularly.
(depending on use).
• Check the unit is clean and in good
Maintenance plan
Check all screws / fastening elements are firmly seated
Functional / safety check of all lights (if fitted)
Functional / safety check of the docking system (add-
on bike and wheelchair)
Clean and oil / grease all pivot points and bearings
Check function of gearing
Check brake-pads for wear and if necessary, re-adjust
the distance from brake-pad to brake-disc.
"Check function of main and parking brake
(replace cables and brake pads if needed)"
"Check chain, gear, gear rim for wear and tear
(and replace if needed)"
"Check redirection chain wheel and replace it if needed
(and replace if needed)"
"Visual inspection of the fork and connecting frame for
any damage
(e.g. crack, formation, deformation, etc.)"
"Visual inspection of the wheelchair frame and back
tubes for any damage
(e.g. crack, formation, deformation, etc.)"
Check tyres (tread, cracks, damages) and replace if
needed
Check, clean and oil the gear components (including
chain)
Check the spoke tension and the rim, hub for damag-
es on the add-on bike and the wheelchair
Check all cable and electrical connectors
Check tightness of steering shaft
20
switches and the brake levers.
condition.
Comments
The following can be done by user or attendant:
• Before oiling, please remove old oil remnants from
the components.
• Spray lightly with Teflon spray.
• Ensure that surplus oil/spray does not contaminate
the surrounding area, (Clothes, brakes, etc).
The following can be done by user or attendant:
• Check for cracks in the rubber components.
• Replace any cracked rubber components or take it to
your nearest authorised service centre for
refurbishment.
1st inspection
2nd inspection
"250 km
"1000 km
or after 6 month"
or after 1 year"
X
X
X
X
X
X
X
X
X
X
X
X
Annual
inspections
"every 1000 km /
or every year"
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
Attitude/Attitude Hybrid Rev.3.0
Advertenties
Hoofdstukken
Inhoudsopgave
