Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
7.0 Functional Components
Connecting frame (Fig.7.1):
The connecting frame acts as a parking stand, and fascilitates
easy docking/manoeuvring when the add-on bike is
disconnected from the wheelchair.
The height of the stand wheels can be adjusted using the bolts,
(A).
WARNING!
• The stand wheels must always stay min 30.0 mm above the
ground, when the add-on bike is connected to the
wheelchair.
• The stand wheels must be always adjusted so that the stand
of the add-on bike remains stable when the add-on bike is
disconnected from the wheelchair.
Brakes:
The add-on bike has two brakes that work independently from
one another.
Parking brake (Fig.7.2 ):
The parking brake is assembled to the fork and locks in
automatically when activated. Therefore the red lever must lock
in. The add-on bike should not move with activated parking
brake to make sure parking is safe
To release the parking brake just push the red lever.
Main brakes (Fig.7.3):
The brakes allow you to safely and comfortably brake your add-
on bike.
Performance brake lever (Fig.7.4):
The Performance brake lever (optional) gives you the possibility
to adjust the lever-feel and the way that the main brake is
applied.
Turning the red adjusting screw (A) on the brake lever
clockwise results in a harder lever feel and a better, linear,
controllability of the brake-force.
Turning the red adjusting screw (A) on the brake lever counter-
clockwise will result in a softer lever-feel and more progressive
brake-force.
Attitude/Attitude Hybrid Rev.3.0
Fig.7.1
Fig.7.2
Fig.7.3
Fig.7.4
A
A
15
Advertenties
Hoofdstukken
Inhoudsopgave
