Download Print deze pagina

Dräger X-am 2600 Gebruiksaanwijzing pagina 33

Advertenties

6.3
Alarm settings (factory setting)
Definition:
Pre-acknowledgement: If, during the alarm condition, the acknowledgement is actuated (by pressing the OK button), the audible
alarm and the vibration are switched off. The alarm is only fully reset (LED and display) once the alarm condition no longer
exists.
Acknowledgement: If an acknowledgement is actuated when the A1 alarm condition no longer exists (by pressing the OK
button), all alarm elements will be reset.
If the A2 and A1 alarms are configured as acknowledgeable, a pre-acknowledgement or acknowledgement of the A2 alarm
will pre-acknowledge the A1 alarm or fully acknowledge it if no further alarm condition exists.
Explanation of symbols:
: Feature activated
: Pre-acknowledgement
Alarms / Events
A1 ↑ (increasing)
A2 ↑ (increasing)
A1 ↓ (decreasing)
A2 ↓ (decreasing)
1)2)
STEL
3)
TWA
4)
Error
5)
Battery pre-alarm
6)
Battery main alarm
Device error
Channel error
1) The STEL alarm can trigger with a delay of up to one minute.
2) The work being carried out must be regulated in accordance with national regulations after this alarm.
3) A TWA alarm can only be reset by switching the gas detector off and then on again.
4) For troubleshooting, see the Technical Manual.
5) The battery will last another approx. 10 minutes once the battery pre-alarm has been triggered.
6) The gas detector automatically switches off after 20 s when the battery main alarm is triggered.
7
Storage
Dräger recommends storing the device in the charging
module (order no. 8318639).
Dräger recommends checking the charge status of the energy
supply every 3 weeks at the latest and charging the gas
detector when the device is not stored in the charging module.
8
Disposal
This product must not be disposed of as household
waste. This is indicated by the adjacent symbol.
You can return this product to Dräger free of charge. For
information please contact the national marketing orga-
nizations or Dräger.
Instructions for use
|
X-am
Representa-
Latching
tion in display
A1
-
A2
A1
-
A2
STEL
TWA
-
-
-
-
-
®
®
2600 / X-am
2800 / X-am
Acknowledge-
able
-
-
-
-
-
Batteries must not be disposed of as household waste.
They are therefore marked with the adjacent symbol.
Dispose of batteries at battery collection centres as
specified by the applicable regulations.
9
Technical data
9.1
Gas detector
Ambient conditions:
®
5800
LEDs
Horn
|
en
Storage
Vibration
33

Advertenties

loading

Deze handleiding is ook geschikt voor:

X-am 2800X-am 5800Mqg 02 0 series