Inhoudsopgave
Advertenties
Check the areas where the pole pruner is to be used and remove any wires,
hidden electrical cables and other foreign objects.
All adjustments (inclining the blade head, altering the length of the telescopic
tube) have to be made with the sheath in place, and the pole pruner must not
rest on the blade in the process.
Before using the machine and after any impact, check for signs of wear or
damage.
Have the appropriate repair work carried out if necessary.
Never attempt to use an incomplete product or one with an unauthorised
modification.
Power tool use and care
Know how to stop the product quickly in an emergency. Never hold the product
by the protective cover.
Do not use the pole pruner if the protection equipment are damaged.
Do not use ladders whilst operating the pole pruner.
Always use the product when standing on solid ground.
Remove the battery:
– before leaving the pole pruner unattended for any period;
– before clearing a blockage;
– before checking, cleaning or working on the pole pruner;
– if you hit an object. Do not use your pole pruner until you are sure that the
entire pole pruner is in a safe operating condition;
– if the pole pruner starts to vibrate abnormally. Check immediately. Excessive
vibration can cause injury;
– before passing to another person.
RISK OF PHYSICAL INJURY!
Do not touch the chain.
v When work is finished or interrupted, refit the protective cover.
All nuts and screws must be firmly tightened to ensure a safe operating condition
of the product.
If the product got hot during operation, let it cool down before storage.
The pole pruner must not be stored over 35 °C or under direct exposure to
sunlight.
Do not store the pole pruner in places with static electricity.
Beware of falling debris.
Only work in the daylight or when visibility is good.
2. ASSEMBLY
DANGER! Risk of injury!
Cut injury when the product starts accidentally.
v Remove the battery and slide the protective cover over the
bar before you assemble the product.
The Pole Pruner, battery, battery charger, chain, bar, protective cover
complete with hex wrench and the operating instructions are included in
the scope of delivery.
To assemble the telescopic handle [ Fig. A1 / A2 ]:
(2)
1. Slide the telescopic tube
stop position. The two markings
(3)
2. Tighten the grey nut
.
To assemble the shoulder strap [ Fig. A3 ]:
CAUTION!
The supplied shoulder strap must be used.
1. Widen the belt clip
(4)
, clamp it around the tube and tighten it with the
(5)
screw
.
2. Hook the carabiner
(6)
onto the belt clip
3. Adjust the shoulder strap to the desired length with the quick release
fastener.
3. OPERATION
DANGER! Risk of injury!
Cut injury when the product starts accidentally.
v Wait for the chain to stop, remove the battery and slide the
protective cover over the bar before you adjust or transport
the product.
GAR_14770-20.960.03_2024-11-14.indd 13
GAR_14770-20.960.03_2024-11-14.indd 13
(1)
into the motor unit
until you reach the
(M)
must be opposite from each other.
(4)
.
To charge the battery [ Fig. O1 / O2 / O3 ]:
CAUTION!
v Note the mains voltage! The voltage of the power source must
match the voltage specified on the rating plate of the charger.
For the GARDENA Pole Pruner Art. 14770-55 there is no battery
and no charger in the scope of delivery.
Thanks to the intelligent charging process, the charge condition of the
battery is automatically detected and then charged up with the optimal
charge current depending on battery temperature and voltage.
In this way, the battery is treated with care and remains permanently fully
charged when it is stored in the charger.
(A)
1. Push the locking button
and remove the battery
holder
(D)
.
(C)
2. Connect the battery charger
into a mains socket.
3. Slide the battery charger
(C)
onto the battery
When the battery charge indicator
the battery is being charged.
When the battery charge indicator
permanently green the battery is completely charged
(Charging time, see 7. TECHNICAL DATA).
4. Examine the charge status regularly while you charge.
(B)
5. When the battery
is completely charged, you can disconnect the
battery
(B)
from the charger
(C)
.
Meaning of the indication elements:
Indication on the charger [ Fig. O3 ]:
Flashing of the battery
The charging procedure is indicated by flashing of the battery charge
(Lc)
(Lc)
charge indicator
indicator
.
Note: The charging procedure is only possible when the battery
temperature is within the allowable charging temperature range,
see 7. TECHNICAL DATA.
Continuous lighting
Continuous lighting of the battery charge indicator
of the battery
the battery is fully charged or that the temperature of the battery is
charge indicator
(Lc)
not within the allowable charging temperature range and can therefore
not be charged.
When the battery is not inserted, continuous lighting of the battery
charge indicator
(Lc)
indicates that the mains plug is inserted in the
socket outlet and that the battery charger is ready for operation.
Battery charge status indication
After starting the product, the battery charge status indication
is displayed for 5 seconds.
Battery charge status
Battery charge status indication
67 – 100 % charged
(L1)
(L1)
34 – 66 % charged
11 – 33 % charged
(L1)
0 – 10 % charged
(L1)
If the LED
(L1)
flashes green, the battery must be charged.
(Wp)
If the error LED
is illuminated or flashing, see 6. TROUBLESHOOTING.
To fill in chain oil [ Fig. O5 ]:
DANGER!
Physical injury due to chain breakage when the chain on
the bar is not sufficiently lubricated.
v Check whether sufficient quantities of chain oil are delivered
prior to each use.
We recommend GARDENA Chainsaw Oil art. 6006 or an equivalent,
bio chain oil from specialist retailers.
1. Unscrew the lid
(7)
of the oil tank.
(8)
2. Fill chain oil into the filler neck
completely filled with oil.
(7)
3. Close the lid
of the oil tank again.
4. Check the oil lubrication system.
The device must be cleaned thoroughly if oil has been spilled.
To check the oil lubrication system [ Fig. O6 ]:
(20)
v Point the bar
at a bright wood cutting surface at a distance of
approx. 20 cm.
After operating the machine for one minute, clear traces of oil must
be visible on the surface.
(B)
from the battery
(B)
.
(Lc)
at the charger flashes green
(Lc)
at the charger illuminates
(Lc)
indicates that
(P)
on the product [ Fig. O4 / O14 ]:
(P)
,
(L2)
and
(L3)
illuminate green
(L2)
and
illuminate green
illuminates green
flashes green
(9)
until the viewing window
is
14.11.24 12:57
14.11.24 12:57
13
Advertenties
Inhoudsopgave
